Command disabled: backlink

Density of a body


What´s density? What´s it used?


If you can not see the applications of this page, you can download Java at: http://www.houspain.com/gttp/salsaj








The density is a magnitude used by the physics and chemistry to determine the amoun of mass contained in a given volume.


There are two types of densities:

  • ABSOLUT DENSITY: the density, which measure the mass per unit volume and is usually known by density.

Therefore, to calculate the density of a body you have to consider the following formula:


                      tabular{11}{11}{{rho = masa/volumen}} or that´s the same tabular{11}{11}{{ρ= m/v}}


where –mass is the number of particles that make up the substance or body. The mass is measured in grams.
          (What´s the difference between mass and weight of a body?)
         –and the volume is the total number of scattered molecules.
          The volume is in cubic units ({L^3}).



  • RELATIVE DENSITY: is the density that compares the density of a substance with the density of water.

Is calculated using the followingo formula:

             tabular{11}{11}{{relative density = {density of the substance}/{density of water}}} or that´s the same tabular{11}{11}{{ρ_relative = {ρ_substance}/{ρ_water}}}

The density of water is {1000kg/m^3} or that´s the same {1 g/cm^3}








:?:Observes these two buckets, which belives it has greater density?

Because we know that density is the amount of mass contained in a given volume, it is easy to see that as the buckets are equal (have the same volume) and B in the cube is more number of particles (ie, higher mass), the density of the bucket B is greater than the density of the cube A.LOL






:?:Observe the following photograph of the globular cluster M13 or Hercules globular cluster:

                
We take two regions of the cluster, A and B.
For the same volume (square of 12*12 light years), we see that the area A accommodates smaller number of stars that the area B .


Which region has the lowest density?
A volume equal to the two areas, area B contains the largest number of stars in zone A, therefore the density of A is less than the density of B.LOL






In nature, the matter can be presented in three different states: solid, liquid or gaseous.

Let´s go to look some examples of densities of various elements and substances most common and known to us.


Some solids are:

Sodium Diamond Silicon dioxide Cesium chloride
densidad (g/cm³) 0.97 3.5 2.6 3.99

                        



Some liquids are:

Water Ethanol Essential Oil Petrol
densidad (g/cm³) 1 0.79 0.92 0.71

                        

Some gases are:

Ozone Carbon Dioxide Air Ammonia
densidad (g/cm³) 2.14 1.6 1.18 0.73

                        


The data given in this section of gases, are data in normal pressure and temperature, ie:

         pressure = 1 atmosphere           temperature = 0º = 273 K






Example


A ball of radius 51.6 cm is composed of 40% iron and the rest is aluminium.

a)What is the area and volume of the ball?
    (What are the area and volume of a spherical body?)


b)What is the weight of the ball?
     (What is the weight of a body?)



a) The area of any sphere is:
          tabular{11}{11}{{ÁREA = 4.Pi.R^2}}

As the radius of the ball is R=15.6 cm, the area is:

{Area(ball) = 4.Pi.15´6^2}= 3058 square centimeters.


The volume of a sphere is equal to:

          tabular{11}{11}{{VOLUME={4/3}.Pi.R^3}}


As the radius of the ball is R=15.6 cm, the volume turns out to be:

{Volume(ball)={4/3}.Pi.15´6^3}= 15902.4 square centimeters.



b) To calculate the weight of the ball we need to know the densities of the materials that comprise it.
The density of iron is: {{7.84} g/cm^3}

The density of aluminium is: {{2.7} g/cm^3}

For the definition of density:tabular{11}{11}{{rho = mass/volume}}. Then the mass of the ball is:

{mass = rho*volume}. doublerightmass = (7.84×0.4 + 2.7×0.6)*15902´4 = 75759 grams

Therefore, for a body in the earth´s surface, where g = 9.8, the weight is:

weight = 75´759 x 9.8 = 742 Newton approximately.








  • BUOYANCY


What is buoyancy?

The density of a body is related to the buoyancy: a substance will float on the other if their density is lower.

:?:What happens when we launch a paper airplane to water?


The density of the paper is 0.77 g/cm³ and the density of water is 1 g/cm³, therefore, at the begining the paper fleet becouse the density of the sheet is lower than the density of water.


                                      


After a short period of time, just need to soak the sheet and become a grater density (particles bind water and cellulose), the blade falls to the bottom because the takes a higher density than the water.


:?:What about wood, lead and water?

— The wood floats on water while the lead sinks into it, and that lead has greater density than water and the wood density is lower..


:?:What about wood, lead and gasoline?

— However if we have galoline instead of water, wood sink and lead in gasoline, as thes density of gasoline is lower than that of lead and wood.

 
density_of_a_body.txt · Última modificación: 24/04/2017 13:13 (editor externo)
HOU Internacial. Galieleo Teacher Training Program. Universidad complutense de Madrid. DokuWiki IYA 2009